Driver side rear lights - when I turn on the lights, all tail lights are okay but when I press the brake pedal all lights go out on the rear driver side. Without lights on the brake light on the left side doesn't work. Turn signal, tail light, and backup lights work until you step on the brake. Every thing works on the passenger side.
Here are the wires. Per the FSM, the Left signal sense wire is LB/WT and the Right is LB/YL. With the running lights ON AND OFF, I measured: -11v on both with no signal on. -Right arrow on: -LB/WT fluctuated and LB/YL was 0v. -Left arrow on: -LB/YL fluctuated and LB/WT was 0v. So the stalk seems to be working fine.
If they don't shut off, most likely it is your turn signal switch, and that is way too hard to explain how to replace it. Also, with the hazards, try to jiggle the switch when you press it. It might just be dirty. See if any lights come on when you press it. They may not flash, but they should turn on.
Jeep Master. 5,569 Answers. Generally, if a bulb has failed or is making only poor contact, the blink rate will increase since the standard blinker relay uses a thermal strip heated by current flow to the bulbs and when it is too low, it blinks rapidly and briefly. You still have the front bulbs to check and maybe pulling the fuse for that
The left tail light on our '05 grand cherokee laredo does not come on. the brake light, turn signal, and reverse lights do work. everything on the right side works. I've switched the left housing and the right housing and i have the exact same situation, left side is messed up, right side works. this leads me to believe that it is not the
2003 Jeep Grand Cherokee. Mechanic's Assistant: Are you fixing your Relay yourself? What have you tried so far? Relay not working on left turn signal. Replaced relay, now nothing. Mechanic's Assistant: Anything else you want the mechanic to know before I connect you? Replacement relay was Napa brand.
G1liIF. 390 421 244 135 364 22 21 98 270
jeep grand cherokee left turn signal not working
